Huawei E303 Hilink Firmware

Posted on
  1. Huawei Hilink Windows 10
  2. Firmware Modem Huawei E303 Hilink

Windows does not know which driver to install for these devices, but fortunately the driver is provided by Mobile Partner and just needs slight modification. This procedure only needs to be performed once. Assuming a default installation of Mobile Partner, locate the file ewser2k.inf and open it in Notepad or Wordpad. On English systems the file will be located at C: Program Files Mobile Partner Driver Driver X86 on 32-bit systems and C: Program Files (x86) Mobile Partner Driver Driver X64 on 64-bit systems. Near the start of the file you should see a section named QcomSerialPort. We need to add the following lines: Code:%QcomDevice01% = QportInstall01, USB VID12d1&PID1442&MI00%QcomDevice00% = QportInstall00, USB VID12d1&PID1442&MI01.so that Windows knows which driver to use for these devices. A good place would be in between PID143E and PID1448, so the modified portion of the file should look like this: Code.

QcomSerialPort.%QcomDevice01% = QportInstall01, USB VID12d1&PID143E&MI02%QcomDevice01% = QportInstall01, USB VID12d1&PID1442&MI00%QcomDevice00% = QportInstall00, USB VID12d1&PID1442&MI01%QcomDevice01% = QportInstall01, USB VID12d1&PID1448&MI01 Now right-click on each unknown device in turn and tell Windows you will select the driver and point at the location where you found ewser2k.inf as above. After doing this, the devices should now appear as a 3G PC UI Interface and a 3G Application Interface under Ports.

MDMA is able to detect the modem in this state and can be used to check signal strength and send USSD commands, but in order to connect to the internet (establish a dial-up connection), we need to go deeper and enable the modem interface. You can download and open the 3G PC UI Interface, COM3 in this example, and send the following AT commands: Code: AT^U2DIAG=0 AT+CFUN=4 AT+CFUN=6 This enables the modem interface and resets the modem so that it will appear.

Alternatively, you can use MDMA with the /hwstorage:0 command line switch to send the ^U2DIAG command and reset the modem automatically. Hopefully the modem will now be recognized and the drivers automatically installed. The hardware IDs should now have changed to: usbcdcacm Vid12d1&Pid1c05&MI00 usbcdcacm Vid12d1&Pid1c05&MI01 usbcdcacm Vid12d1&Pid1c05&MI02. Windows does not know which driver to install for these devices, but fortunately the driver is provided by Mobile Partner and just needs slight modification. This procedure only needs to be performed once. Assuming a default installation of Mobile Partner, locate the file ewser2k.inf and open it in Notepad or Wordpad.

Huawei E303 Hilink Firmware

On English systems the file will be located at C: Program Files Mobile Partner Driver Driver X86 on 32-bit systems and C: Program Files (x86) Mobile Partner Driver Driver X64 on 64-bit systems. Near the start of the file you should see a section named QcomSerialPort. We need to add the following lines: Code:%QcomDevice01% = QportInstall01, USB VID12d1&PID1442&MI00%QcomDevice00% = QportInstall00, USB VID12d1&PID1442&MI01.so that Windows knows which driver to use for these devices.

A good place would be in between PID143E and PID1448, so the modified portion of the file should look like this: Code. QcomSerialPort.%QcomDevice01% = QportInstall01, USB VID12d1&PID143E&MI02%QcomDevice01% = QportInstall01, USB VID12d1&PID1442&MI00%QcomDevice00% = QportInstall00, USB VID12d1&PID1442&MI01%QcomDevice01% = QportInstall01, USB VID12d1&PID1448&MI01 Now right-click on each unknown device in turn and tell Windows you will select the driver and point at the location where you found ewser2k.inf as above. After doing this, the devices should now appear as a 3G PC UI Interface and a 3G Application Interface under Ports. MDMA is able to detect the modem in this state and can be used to check signal strength and send USSD commands, but in order to connect to the internet (establish a dial-up connection), we need to go deeper and enable the modem interface. You can download and open the 3G PC UI Interface, COM3 in this example, and send the following AT commands: Code: AT^U2DIAG=0 AT+CFUN=4 AT+CFUN=6 This enables the modem interface and resets the modem so that it will appear.

Alternatively, you can use MDMA with the /hwstorage:0 command line switch to send the ^U2DIAG command and reset the modem automatically. Hopefully the modem will now be recognized and the drivers automatically installed. The hardware IDs should now have changed to: usbcdcacm Vid12d1&Pid1c05&MI00 usbcdcacm Vid12d1&Pid1c05&MI01 usbcdcacm Vid12d1&Pid1c05&MI02.

Hi all dear friends are you searching for huawei modem unlock? Is your device locked? Your unlock attempt is 0? Dont worry, we have all new solution for unlocking all modems. Permanent and fully unlocked?

Download Firmware modem Huawei E303 HiLink - Firmware RouterUnlock.com. Basic information query: SD card file management: WiFi: Operator name, Roaming status, Battery level, Signal strength, Data traffic and connection duration.

Yes it is, all new algo (86 series IMEI) unlock codes all new modems supported Incl E3272,E5372,E3276 4G modems all simple unlock through codes, we will tell you or teach you how it works. Now we are providing unlock for resellers. New 86 series unlock code for new models for sale Master Account: Unlimited credit,Unlimited APIs, Unlimited API Administrator account. API admin Account: Unlimited API key and Unlimited Credit. Api Key: Credit as per your order See more at: unlimited online/offline algo code creation.

Contact for more: rahulmayappa@gmail.com or genuinespot@gmail.com algo online and offline calculator (algortham run in your local host) rahulmayappa@gmail.com or genuinespot@gmail.com +847.